Scoreboard Assembly Instructions
 |
What you will need:
- 14 Pivot digit hinged adapters
- 28 Black wire ties, 4" long
- 2 Black wire shelves, 48" wide
Required tools: none Assembly time: 15 minutes
- Each digit has 2 male pegs. Carefully flex the plastic and snap the pegs into the hinged adapters.
- Loosely fasten each digit to the wire shelf with two wire ties. Check for correct position. Snug up the wire ties.
Notes:
The black wire shelves and black wire ties can be purchased at a builder's supply store. Wire shelves perform well, they are light and strong. The shelves are easy to transport, they fit in most vehicles. The black wire tends to blend with the black digit backgrounds and disappear from view.
The wire shelves are convenient to position with clamps or with elastic hooked cords. The shelves do not catch the wind, so they stay in place during breezy matches. Finally, the wire shelves have no burrs or sharp edges or surfaces.
To purchase scoreboard accessories, visit www.aussport.com.au/scoreboards/ManualScoreboards.html
 |
 |